U ovom projektu smo htjeli pomoći starijim osobama koje su slabije pokretne i koje ne čuju. Osoba koja želi ući u stan na mobitel uključi tipku i u stanu se upali dioda. Osoba koja je slabo pokretna i slabije čuje na mobitel uključi tipku s kojoj daje signal da se otključaju vrata, u našem projektu upali se druga dioda.

Spajanje dioda , otpornika na Arduinom MKR1000.

Shemu ovoga projekta možete preuzeti ovdje.

#define BLYNK_PRINT /*
int LedZelena = 6;
int LedCrvena = 7;

void setup() {
 
  pinMode(LedZelena, OUTPUT);     
  pinMode(LedCrvena, OUTPUT);       
}

void loop() {
  
  digitalWrite(LedZelena, HIGH);  
  digitalWrite(LedCrvena, LOW);     
  delay(500);                     
  digitalWrite(LedZelena, LOW);   
  digitalWrite(LedCrvena, HIGH);    
  delay(500);                     
}

Arduino program ovoga projekta možete preuzeti ovdje.

#define BLYNK_PRINT /*

/*************************************************************
  Download latest Blynk library here:
    https://github.com/blynkkk/blynk-library/releases/latest

  Blynk is a platform with iOS and Android apps to control
  Arduino, Raspberry Pi and the likes over the Internet.
  You can easily build graphic interfaces for all your
  projects by simply dragging and dropping widgets.

    Downloads, docs, tutorials: http://www.blynk.cc
    Sketch generator:           http://examples.blynk.cc
    Blynk community:            http://community.blynk.cc
    Follow us:                  http://www.fb.com/blynkapp
                                Tweets by blynk_app

  Blynk library is licensed under MIT license
  This example code is in public domain.

 *************************************************************

  You’ll need:
   - Blynk App (download from AppStore or Google Play)
   - Arduino MKR1000 board
   - Decide how to connect to Blynk
     (USB, Ethernet, Wi-Fi, Bluetooth, ...)

  There is a bunch of great example sketches included to show you how to get
  started. Think of them as LEGO bricks  and combine them as you wish.
  For example, take the Ethernet Shield sketch and combine it with the
  Servo example, or choose a USB sketch and add a code from SendData
  example.
 *************************************************************/

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT SerialUSB


#include 
#include 
#include 

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "727ef6734a104863b7aa2f0ba4782993";

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "MicaJeCancer";
char pass[] = "vxvj3562";

void setup()
{
  // Debug console
  SerialUSB.begin(9600);

  Blynk.begin(auth, ssid, pass);
  // You can also specify server:
  //Blynk.begin(auth, ssid, pass, "blynk-cloud.com", 8442);
  //Blynk.begin(auth, ssid, pass, IPAddress(192,168,1,100), 8442);
}

void loop()
{
  Blynk.run();
  // You can inject your own code or combine it with other sketches.
  // Check other examples on how to communicate with Blynk. Remember
  // to avoid delay() function!
}

Arduino program ovoga projekta možete preuzeti ovdje.

#define BLYNK_PRINT /*

/*************************************************************
  Download latest Blynk library here:
    https://github.com/blynkkk/blynk-library/releases/latest

  Blynk is a platform with iOS and Android apps to control
  Arduino, Raspberry Pi and the likes over the Internet.
  You can easily build graphic interfaces for all your
  projects by simply dragging and dropping widgets.

    Downloads, docs, tutorials: http://www.blynk.cc
    Sketch generator:           http://examples.blynk.cc
    Blynk community:            http://community.blynk.cc
    Follow us:                  http://www.fb.com/blynkapp
                                Tweets by blynk_app

  Blynk library is licensed under MIT license
  This example code is in public domain.

 *************************************************************

  You’ll need:
   - Blynk App (download from AppStore or Google Play)
   - Arduino MKR1000 board
   - Decide how to connect to Blynk
     (USB, Ethernet, Wi-Fi, Bluetooth, ...)

  There is a bunch of great example sketches included to show you how to get
  started. Think of them as LEGO bricks  and combine them as you wish.
  For example, take the Ethernet Shield sketch and combine it with the
  Servo example, or choose a USB sketch and add a code from SendData
  example.
 *************************************************************/

/* Comment this out to disable prints and save space */
#define BLYNK_PRINT SerialUSB


#include 
#include 
#include 

// You should get Auth Token in the Blynk App.
// Go to the Project Settings (nut icon).
char auth[] = "442ed2383848406d91c193374ddbddf3";

// Your WiFi credentials.
// Set password to "" for open networks.
char ssid[] = "MicaJeCancer";
char pass[] = "vxvj3562";

void setup()
{
  // Debug console
  SerialUSB.begin(9600);

  Blynk.begin(auth, ssid, pass);
  // You can also specify server:
  //Blynk.begin(auth, ssid, pass, "blynk-cloud.com", 8442);
  //Blynk.begin(auth, ssid, pass, IPAddress(192,168,1,100), 8442);
}

void loop()
{
  Blynk.run();
  // You can inject your own code or combine it with other sketches.
  // Check other examples on how to communicate with Blynk. Remember
  // to avoid delay() function!
}

Arduino program ovoga projekta možete preuzeti ovdje.

Projekt su izradili Jure Miličević i Dino Milevoj uz mentorstvo Ljiljane Miletić iz Udruge informatičara Požeško – slavonske županije.

Projekt je prijavljen na temu: Internet of Things: Pametna rasvjeta.